Deleting Plone and reinstall

i installed Plone 5 on VPS. Now its popping out some errors like "This site can’t be reached" and if i want to access the localhost by myvpsip.com:8080 it pops out with internal server error. searched out different things but didn't helpout.

what i think i should remove entire plone from my VPS and re-install.

would love to see and use your suggestions if we can fix it or remove it.

Thanks

Provide accurate information about what you see in the logs of your reverse proxy and what you see in your logs on the Plone side.

-aj

this is what i have got from the error_log

07 04:48:56 2016] [notice] Digest: generating secret for digest authentication ... [Thu Apr 07 04:48:56 2016] [notice] Digest: done [Thu Apr 07 04:48:56 2016] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 configured -- resuming normal operations [Thu Apr 07 04:49:30 2016] [crit] [client 210.56.30.114] configuration error: couldn't perform authentication. AuthType not set!: / [Thu Apr 07 04:49:30 2016] [crit] [client 210.56.30.114] configuration error: couldn't perform authentication. AuthType not set!: /favicon.ico, referer: http://www.biztech-resources.com:8080/ [Thu Apr 07 04:51:13 2016] [crit] [client 210.56.30.114] configuration error: couldn't perform authentication. AuthType not set!: /Plone [Thu Apr 07 04:51:15 2016] [crit] [client 210.56.30.114] configuration error: couldn't perform authentication. AuthType not set!: /favicon.ico, referer: http://biztech-resources.com:8080/Plone [Thu Apr 07 06:27:54 2016] [crit] [client 91.236.75.4] configuration error: couldn't perform authentication. AuthType not set!: /reader/about/ [Thu Apr 07 09:58:08 2016] [crit] [client 66.249.73.204] configuration error: couldn't perform authentication. AuthType not set!: /robots.txt [Thu Apr 07 10:02:28 2016] [crit] [client 188.68.224.62] configuration error: couldn't perform authentication. AuthType not set!: /httptest.php [Thu Apr 07 11:00:04 2016] [crit] [client 188.68.224.62] configuration error: couldn't perform authentication. AuthType not set!: /httptest.php [Thu Apr 07 14:09:35 2016] [crit] [client 185.25.148.240] configuration error: couldn't perform authentication. AuthType not set!: /testproxy.php [Thu Apr 07 14:51:04 2016] [crit] [client 188.68.224.62] configuration error: couldn't perform authentication. AuthType not set!: /httptest.php [Thu Apr 07 14:53:19 2016] [crit] [client 82.135.64.147] configuration error: couldn't perform authentication. AuthType not set!: /Diagnostics.asp [Thu Apr 07 15:44:31 2016] [crit] [client 66.249.73.196] configuration error: couldn't perform authentication. AuthType not set!: /robots.txt [Thu Apr 07 15:47:52 2016] [crit] [client 188.68.224.62] configuration error: couldn't perform authentication. AuthType not set!: /httptest.php [Thu Apr 07 20:22:13 2016] [crit] [client 123.59.59.52] configuration error: couldn't perform authentication. AuthType not set!: / [Thu Apr 07 20:22:31 2016] [crit] [client 123.59.59.52] configuration error: couldn't perform authentication. AuthType not set!: / [Thu Apr 07 21:13:16 2016] [crit] [client 188.68.224.62] configuration error: couldn't perform authentication. AuthType not set!: /httptest.php [Thu Apr 07 21:38:53 2016] [crit] [client 188.68.224.62] configuration error: couldn't perform authentication. AuthType not set!: /httptest.php [Thu Apr 07 21:56:51 2016] [crit] [client 66.249.73.204] configuration error: couldn't perform authentication. AuthType not set!: /robots.txt [Fri Apr 08 00:11:58 2016] [crit] [client 185.49.14.190] configuration error: couldn't perform authentication. AuthType not set!: /testproxy.php [Fri Apr 08 01:50:15 2016] [crit] [client 210.56.30.114] configuration error: couldn't perform authentication. AuthType not set!: / [Fri Apr 08 01:50:16 2016] [crit] [client 210.56.30.114] configuration error: couldn't perform authentication. AuthType not set!: / [Fri Apr 08 01:50:17 2016] [crit] [client 210.56.30.114] configuration error: couldn't perform authentication. AuthType not set!: /favicon.ico, referer: http://www.biztech-resources.com:8080/ [Fri Apr 08 03:35:51 2016] [notice] caught SIGTERM, shutting down [Fri Apr 08 03:35:51 2016] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Fri Apr 08 03:35:51 2016] [notice] Digest: generating secret for digest authentication ... [Fri Apr 08 03:35:51 2016] [notice] Digest: done [Fri Apr 08 03:35:51 2016] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 configured -- resuming normal operations

Completely unrelated to Plone. And your Plone logs?

-aj

i think we should leave it as it is, just let me know if i can delete this headache from my vps or not. :slight_smile:

The problem may not have anything to do with your Plone installation. It looks likelier that you configured your Apache incorrectly. Please post your Apache configuration file.

how did you install it?

ServerTokens Prod

ServerRoot "/etc/httpd"

PidFile var/run/httpd.pid

Timeout 300

KeepAlive On

MaxKeepAliveRequests: The maximum number of requests to allow

during a persistent connection. Set to 0 to allow an unlimited amount.

We recommend you leave this number high, for maximum performance.

MaxKeepAliveRequests 100

KeepAliveTimeout: Number of seconds to wait for the next request from the

same client on the same connection.

KeepAliveTimeout 15

Server-Pool Size Regulation (MPM specific)

prefork MPM

StartServers: number of server processes to start

MinSpareServers: minimum number of server processes which are kept spare

MaxSpareServers: maximum number of server processes which are kept spare

ServerLimit: maximum value for MaxClients for the lifetime of the server

MaxClients: maximum number of server processes allowed to start

MaxRequestsPerChild: maximum number of requests a server process serves

StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000

worker MPM

StartServers: initial number of server processes to start

MaxClients: maximum number of simultaneous client connections

MinSpareThreads: minimum number of worker threads which are kept spare

MaxSpareThreads: maximum number of worker threads which are kept spare

ThreadsPerChild: constant number of worker threads in each server process

MaxRequestsPerChild: maximum number of requests a server process serves

StartServers 4 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0

Listen: Allows you to bind Apache to specific IP addresses and/or

ports, in addition to the default. See also the

directive.

Change this to Listen on specific IP addresses as shown below to

prevent Apache from glomming onto all bound IP addresses (0.0.0.0)

#Listen 12.34.56.78:80
Listen 208.73.200.253: 80

Dynamic Shared Object (DSO) Support

To be able to use the functionality of a module which was built as a DSO you

have to place corresponding `LoadModule' lines at this location so the

directives contained in it are actually available before they are used.

Statically compiled modules (those listed by `httpd -l') do not need

to be loaded here.

Example:

LoadModule foo_module modules/mod_foo.so

LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule version_module modules/mod_version.so

The following modules are not loaded by default:

#LoadModule asis_module modules/mod_asis.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule filter_module modules/mod_filter.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule unique_id_module modules/mod_unique_id.so

Load config files from the config directory "/etc/httpd/conf.d".

Include conf.d/*.conf

ExtendedStatus controls whether Apache will generate "full" status

information (ExtendedStatus On) or just basic information (ExtendedStatus

Off) when the "server-status" handler is called. The default is Off.

#ExtendedStatus On

If you wish httpd to run as a different user or group, you must run

httpd as root initially and it will switch.

User/Group: The name (or #number) of the user/group to run httpd as.

. On SCO (ODT 3) use "User nouser" and "Group nogroup".

. On HPUX you may not be able to use shared memory as nobody, and the

suggested workaround is to create a user www and use that user.

NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)

when the value of (unsigned)Group is above 60000;

don't use Group #-1 on these systems!

User apache
Group apache

Section 2: 'Main' server configuration

The directives in this section set up the values used by the 'main'

server, which responds to any requests that aren't handled by a

definition. These values also provide defaults for

any containers you may define later in the file.

All of these directives may appear inside containers,

in which case these default settings will be overridden for the

virtual host being defined.

ServerAdmin: Your address, where problems with the server should be

e-mailed. This address appears on some server-generated pages, such

as error documents. e.g. admin@your-domain.com

ServerAdmin root@biztech-resources.com

ServerName gives the name and port that the server uses to identify itself.

This can often be determined automatically, but we recommend you specify

it explicitly to prevent problems during startup.

If this is not set to valid DNS name for your host, server-generated

redirections will not work. See also the UseCanonicalName directive.

If your host doesn't have a registered DNS name, enter its IP address here.

You will have to access it by its address anyway, and this will make

redirections work in a sensible way.

ServerName www.biztech-resources.com

UseCanonicalName: Determines how Apache constructs self-referencing

URLs and the SERVER_NAME and SERVER_PORT variables.

When set "Off", Apache will use the Hostname and Port supplied

by the client. When set "On", Apache will use the value of the

ServerName directive.

UseCanonicalName Off

DocumentRoot: The directory out of which you will serve your

documents. By default, all requests are taken from this directory, but

symbolic links and aliases may be used to point to other locations.

DocumentRoot "/var/www/html"

Each directory to which Apache has access can be configured with respect

to which services and features are allowed and/or disabled in that

directory (and its subdirectories).

First, we configure the "default" to be a very restrictive set of

features.

Options FollowSymLinks AllowOverride None

Note that from this point forward you must specifically allow

particular features to be enabled - so if something's not working as

you might expect, make sure that you have specifically enabled it

below.

This should be changed to whatever you set DocumentRoot to.

<Directory "/var/www/html">

Possible values for the Options directive are "None", "All",

or any combination of:

Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

Note that "MultiViews" must be named explicitly --- "Options All"

doesn't give it to you.

The Options directive is both complicated and important. Please see

http://httpd.apache.org/docs/2.2/mod/core.html#options

for more information.

Options Indexes FollowSymLinks

AllowOverride controls what directives may be placed in .htaccess files.

It can be "All", "None", or any combination of the keywords:

Options FileInfo AuthConfig Limit

AllowOverride All

Controls who can get stuff from this server.

Order allow,deny
Allow from all

UserDir: The name of the directory that is appended onto a user's home

directory if a ~user request is received.

The path to the end user account 'public_html' directory must be

accessible to the webserver userid. This usually means that ~userid

must have permissions of 711, ~userid/public_html must have permissions

of 755, and documents contained therein must be world-readable.

Otherwise, the client will only receive a "403 Forbidden" message.

See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden

# # UserDir is disabled by default since it can confirm the presence # of a username on the system (depending on home directory # permissions). # UserDir disabled
#
# To enable requests to /~user/ to serve the user's public_html
# directory, remove the "UserDir disabled" line above, and uncomment
# the following line instead:
# 
#UserDir public_html

Control access to UserDir directories. The following is an example

for a site where these directories are restricted to read-only.

#<Directory /home/*/public_html>

AllowOverride FileInfo AuthConfig Limit

Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec

Order allow,deny

Allow from all

Order deny,allow

Deny from all

#

DirectoryIndex: sets the file that Apache will serve if a directory

is requested.

The index.html.var file (a type-map) is used to deliver content-

negotiated documents. The MultiViews Option can be used for the

same purpose, but it is much slower.

DirectoryIndex index.html index.htm

AccessFileName: The name of the file to look for in each directory

for additional configuration directives. See also the AllowOverride

directive.

AccessFileName .htaccess

The following lines prevent .htaccess and .htpasswd files from being

viewed by Web clients.

<Files ~ "^.ht">
Order allow,deny
Deny from all
Satisfy All

TypesConfig describes where the mime.types file (or equivalent) is

to be found.

TypesConfig /etc/mime.types

DefaultType is the default MIME type the server will use for a document

if it cannot otherwise determine one, such as from filename extensions.

If your server contains mostly text or HTML documents, "text/plain" is

a good value. If most of your content is binary, such as applications

or images, you may want to use "application/octet-stream" instead to

keep browsers from trying to display binary files as though they are

text.

DefaultType text/plain

The mod_mime_magic module allows the server to use various hints from the

contents of the file itself to determine its type. The MIMEMagicFile

directive tells the module where the hint definitions are located.

# MIMEMagicFile /usr/share/magic.mime MIMEMagicFile conf/magic

HostnameLookups: Log the names of clients or just their IP addresses

e.g., www.apache.org (on) or 204.62.129.132 (off).

The default is off because it'd be overall better for the net if people

had to knowingly turn this feature on, since enabling it means that

each client request will result in AT LEAST one lookup request to the

nameserver.

HostnameLookups Off

EnableMMAP: Control whether memory-mapping is used to deliver

files (assuming that the underlying OS supports it).

The default is on; turn this off if you serve from NFS-mounted

filesystems. On some systems, turning it off (regardless of

filesystem) can improve performance; for details, please see

http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap

#EnableMMAP off

EnableSendfile: Control whether the sendfile kernel support is

used to deliver files (assuming that the OS supports it).

The default is on; turn this off if you serve from NFS-mounted

filesystems. Please see

http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile

#EnableSendfile off

ErrorLog: The location of the error log file.

If you do not specify an ErrorLog directive within a

container, error messages relating to that virtual host will be

logged here. If you do define an error logfile for a

container, that host's errors will be logged there and not here.

ErrorLog logs/error_log

LogLevel: Control the number of messages logged to the error_log.

Possible values include: debug, info, notice, warn, error, crit,

alert, emerg.

LogLevel warn

The following directives define some format nicknames for use with

a CustomLog directive (see below).

LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
LogFormat "%h %l %u %t "%r" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

"combinedio" includes actual counts of actual bytes received (%I) and sent (%O); this

requires the mod_logio module to be loaded.

#LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combinedio

The location and format of the access logfile (Common Logfile Format).

If you do not define any access logfiles within a

container, they will be logged here. Contrariwise, if you do

define per- access logfiles, transactions will be

logged therein and not in this file.

#CustomLog logs/access_log common

If you would like to have separate agent and referer logfiles, uncomment

the following directives.

#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent

For a single logfile with access, agent, and referer information

(Combined Logfile Format), use the following directive:

CustomLog logs/access_log combined

Optionally add a line containing the server version and virtual host

name to server-generated pages (internal error documents, FTP directory

listings, mod_status and mod_info output etc., but not CGI generated

documents or custom error documents).

Set to "EMail" to also include a mailto: link to the ServerAdmin.

Set to one of: On | Off | EMail

ServerSignature off

Aliases: Add here as many aliases as you need (with no limit). The format is

Alias fakename realname

Note that if you include a trailing / on fakename then the server will

require it to be present in the URL. So "/icons" isn't aliased in this

example, only "/icons/". If the fakename is slash-terminated, then the

realname must also be slash terminated, and if the fakename omits the

trailing slash, the realname must also omit it.

We include the /icons/ alias for FancyIndexed directory listings. If you

do not use FancyIndexing, you may comment this out.

Alias /icons/ "/var/www/icons/"

<Directory "/var/www/icons">
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all

WebDAV module configuration section.

# Location of the WebDAV lock database. DAVLockDB /var/lib/dav/lockdb

ScriptAlias: This controls which directories contain server scripts.

ScriptAliases are essentially the same as Aliases, except that

documents in the realname directory are treated as applications and

run by the server when requested rather than as documents sent to the client.

The same rules about trailing "/" apply to ScriptAlias directives as to

Alias.

ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

"/var/www/cgi-bin" should be changed to whatever your ScriptAliased

CGI directory exists, if you have that configured.

<Directory "/var/www/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all

Redirect allows you to tell clients about documents which used to exist in

your server's namespace, but do not anymore. This allows you to tell the

clients where to look for the relocated document.

Example:

Redirect permanent /foo http://www.example.com/bar

Directives controlling the display of server-generated directory listings.

IndexOptions: Controls the appearance of server-generated directory

listings.

IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8

AddIcon* directives tell the server which icon to show for different

files or filename extensions. These are only displayed for

FancyIndexed directories.

AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif /core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

DefaultIcon is which icon to show for files which do not have an icon

explicitly set.

DefaultIcon /icons/unknown.gif

AddDescription allows you to place a short description after a file in

server-generated indexes. These are only displayed for FancyIndexed

directories.

Format: AddDescription "description" filename

#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

ReadmeName is the name of the README file the server will look for by

default, and append to directory listings.

HeaderName is the name of a file which should be prepended to

directory indexes.

ReadmeName README.html
HeaderName HEADER.html

IndexIgnore is a set of filenames which directory indexing should ignore

and not include in the listing. Shell-style wildcarding is permitted.

IndexIgnore .??* ~ # HEADER README RCS CVS *,v *,t

DefaultLanguage and AddLanguage allows you to specify the language of

a document. You can then use content negotiation to give a browser a

file in a language the user can understand.

Specify a default language. This means that all data

going out without a specific language tag (see below) will

be marked with this one. You probably do NOT want to set

this unless you are sure it is correct for all cases.

* It is generally better to not mark a page as

* being a certain language than marking it with the wrong

* language!

DefaultLanguage nl

Note 1: The suffix does not have to be the same as the language

keyword --- those with documents in Polish (whose net-standard

language code is pl) may wish to use "AddLanguage pl .po" to

avoid the ambiguity with the common suffix for perl scripts.

Note 2: The example entries below illustrate that in some cases

the two character 'Language' abbreviation is not identical to

the two character 'Country' code for its country,

E.g. 'Danmark/dk' versus 'Danish/da'.

Note 3: In the case of 'ltz' we violate the RFC by using a three char

specifier. There is 'work in progress' to fix this and get

the reference data for rfc1766 cleaned up.

Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)

English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)

Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)

Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)

Norwegian (no) - Polish (pl) - Portugese (pt)

Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)

Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)

AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw

LanguagePriority allows you to give precedence to some languages

in case of a tie during content negotiation.

Just list the languages in decreasing order of preference. We have

more or less alphabetized them here. You probably want to change this.

LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW

ForceLanguagePriority allows you to serve a result page rather than

MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)

[in case no accepted languages matched the available variants]

ForceLanguagePriority Prefer Fallback

Specify a default charset for all content served; this enables

interpretation of all content as UTF-8 by default. To use the

default browser choice (ISO-8859-1), or to allow the META tags

in HTML content to override this choice, comment out this

directive:

#AddDefaultCharset UTF-8

AddType allows you to add to or override the MIME configuration

file mime.types for specific file types.

#AddType application/x-tar .tgz

AddEncoding allows you to have certain browsers uncompress

information on the fly. Note: Not all browsers support this.

Despite the name similarity, the following Add* directives have nothing

to do with the FancyIndexing customization directives above.

#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz

If the AddEncoding directives above are commented-out, then you

probably should define those extensions to indicate media types:

AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz

MIME-types for downloading Certificates and CRLs

AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl

AddHandler allows you to map certain file extensions to "handlers":

actions unrelated to filetype. These can be either built into the server

or added with the Action directive (see below)

To use CGI scripts outside of ScriptAliased directories:

(You will also need to add "ExecCGI" to the "Options" directive.)

#AddHandler cgi-script .cgi

For files that include their own HTTP headers:

#AddHandler send-as-is asis

For type maps (negotiated resources):

(This is enabled by default to allow the Apache "It Worked" page

to be distributed in multiple languages.)

AddHandler type-map var

Filters allow you to process content before it is sent to the client.

To parse .shtml files for server-side includes (SSI):

(You will also need to add "Includes" to the "Options" directive.)

AddType text/html .shtml
AddOutputFilter INCLUDES .shtml

Action lets you define media types that will execute a script whenever

a matching file is called. This eliminates the need for repeated URL

pathnames for oft-used CGI file processors.

Format: Action media/type /cgi-script/location

Format: Action handler-name /cgi-script/location

Customizable error responses come in three flavors:

1) plain text 2) local redirects 3) external redirects

Some examples:

#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html

Putting this all together, we can internationalize error responses.

We use Alias to redirect any /error/HTTP_.html.var response to

our collection of by-error message multi-language collections. We use

includes to substitute the appropriate text.

You can modify the messages' appearance without changing any of the

default HTTP_.html.var files by adding the line:

Alias /error/include/ "/your/include/path/"

which allows you to create your own set of files by starting with the

/var/www/error/include/ files and

copying them to /your/include/path/, even on a per-VirtualHost basis.

Alias /error/ "/var/www/error/"

AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en es de fr ForceLanguagePriority Prefer Fallback

ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var

ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var

ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var

ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var

ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var

ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var

ErrorDocument 410 /error/HTTP_GONE.html.var

ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var

ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var

ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var

ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var

ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var

ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var

ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var

ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var

ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var

ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var

The following directives modify normal HTTP response behavior to

handle known problems with browser implementations.

BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4.0" force-response-1.0
BrowserMatch "Java/1.0" force-response-1.0
BrowserMatch "JDK/1.0" force-response-1.0

The following directive disables redirects on non-GET requests for

a directory that does not include the trailing slash. This fixes a

problem with Microsoft WebFolders which does not appropriately handle

redirects for folders with DAV methods.

Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.

BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "MS FrontPage" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
BrowserMatch "^gnome-vfs/1.0" redirect-carefully
BrowserMatch "^XML Spy" redirect-carefully
BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully

Allow server status reports generated by mod_status,

with the URL of http://servername/server-status

Change the ".example.com" to match your domain to enable.

#<Location /server-status>

SetHandler server-status

Order deny,allow

Deny from all

Allow from .example.com

#

Allow remote server configuration reports, with the URL of

http://servername/server-info (requires that mod_info.c be loaded).

Change the ".example.com" to match your domain to enable.

#<Location /server-info>

SetHandler server-info

Order deny,allow

Deny from all

Allow from .example.com

#

Proxy Server directives. Uncomment the following lines to

enable the proxy server:

#
#ProxyRequests On

#<Proxy *>

Order deny,allow

Deny from all

Allow from .example.com

#

Enable/disable the handling of HTTP/1.1 "Via:" headers.

("Full" adds the server version; "Block" removes all outgoing Via: headers)

Set to one of: Off | On | Full | Block

#ProxyVia On

To enable a cache of proxied content, uncomment the following lines.

See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more details.

#

CacheEnable disk /

CacheRoot "/var/cache/mod_proxy"

#

#

End of proxy directives.

Section 3: Virtual Hosts

VirtualHost: If you want to maintain multiple domains/hostnames on your

machine you can setup VirtualHost containers for them. Most configurations

use only name-based virtual hosts so the server doesn't need to worry about

IP addresses. This is indicated by the asterisks in the directives below.

Please see the documentation at

URL:http://httpd.apache.org/docs/2.2/vhosts/

for further details before you try to setup virtual hosts.

You may use the command line option '-S' to verify your virtual host

configuration.

Use name-based virtual hosting.

#NameVirtualHost *:80

NOTE: NameVirtualHost cannot be used without a port specifier

(e.g. :80) if mod_ssl is being used, due to the nature of the

SSL protocol.

VirtualHost example:

Almost any Apache directive may go into a VirtualHost container.

The first VirtualHost section is used for requests without a known

server name.

<VirtualHost 208.73.200.253:80>
RewriteEngine On
RewriteRule ^/(.*) http://208.73.200.253:8080/VirtualHostBase/http/biztech-resources.com:80/plone/VirtualHostRoot/$1 [L,P]
ServerAdmin webmaster@biztech-resources.com
ServerName biztech-resources.com
DocumentRoot /opt/plone
ServerName biztech-resources.com
ErrorLog logs/bitech-resources.com-error_log
CustomLog logs/bitech-resources.com-access_log common

Only one line of that huge dump has any relevance:

RewriteRule ^/(.*) http://208.73.200.253:8080/VirtualHostBase/http/biztech-resources.com:80/plone/VirtualHostRoot/$1 [L,P]

Case is meaningful in Zope/Plone paths. "plone" is not the same as "Plone".

one more thing i noticed here is that i reinstall apache on Centos and plone , it cameup with a new httpd file. when i made changes to it to make plone live, it shows the old favicon it means its picking up something from an old database though i cleaned my vps and everything. why is it showing something from the past. please see the picture.

the favicon its showing belongs to the plone site i have already removed from the VPS.

The favicon is probably cached on your computer / browser. Try going to the site from another computer.
(or it is cahed in apache or whaterver you have in front)

Are you using Diazo or is there some part of your site theme that specifies the favicon? If so, append something like?v=2 to the URL for the favicon to force browsers to fetch the current one. This is a known problem with favicons.

Thanks kim. The problem where im stuck is that, I have made changes to the httpd.cinf but I can not make my site or plone live even not the local host. I have already provided my httpd configration